Wagner Appliance, Winston-Salem's Discount Appliance Store
  • Sell/Recycle an Appliance
  • Obtain Service

To Wire a Replacement Cord:


To replace a 4-wire cord with a 3-wire cord

  • Remove your old cord  If there is no cord then please simply refer to the next step.
  • The Red Wire goes to the left terminal
  • The White Wire goes to the middle terminal
  • The Black Wire goes to the right terminal
  • The Green wire attaches to the case directly (usually there is a green screw to use, if not then then please simply attach the wire using any available screw that attaches to the case

To replace a 4-wire cord with a 3-wire cord

  • Remove your old cord  If there is no cord then please simply refer to the next step.
  • The Red Wire goes to the left terminal
  • The White Wire goes to the middle terminal
  • The Black Wire goes to the right terminal
  • Please disregard where the green wired attached.  This wire is not used with a 3 wire setup
700 Waughtown St.
Winston-Salem, NC 27107
336-784-1984

Hours:
Monday - Friday 8:00-6:00
Saturday 8:00-4:00
Closed on Sundays
Picture
  • Sell/Recycle an Appliance
  • Obtain Service